Our Services
CPAP Titration Study

CPAP Titration Study

In a CPAP titration study, you sleep wearing CPAP while a sleep scientist adjusts the air pressure to find the level that keeps your airway open. The study takes place in a hospital sleep laboratory.

Illustrative overnight CPAP study in a sleep laboratory.

What does a CPAP titration study do?

A woman asleep wearing a CPAP mask and sensors while a sleep scientist adjusts the settings from a nearby room.
The sleep scientist adjusts the pressure from the monitoring room.

Continuous positive airway pressure (CPAP) treats obstructive sleep apnoea by blowing air through a mask, and the air pressure holds the throat open during sleep. The amount of pressure this takes differs from one person to the next, and a titration study is one way of finding yours.

The study records the same signals as an in-lab sleep study, such as brain waves, breathing, and oxygen level, while you wear a CPAP mask. From the monitoring room, the sleep scientist raises or lowers the pressure during the night. The aim is a level that stops the pauses in breathing across different stages of sleep and sleeping positions, without going higher than you need.

Need urgent care?

Call triple zero (000) immediately if you are short of breath and any of these apply: you cannot speak in full sentences, you have pain in your chest, arm, or jaw, your skin is pale and sweaty, your lips are blue, or you feel drowsy or confused.

Do not wait for a routine appointment or drive yourself to hospital.

What happens on the night?

You arrive at the sleep laboratory in the evening. Before you settle for the night, staff help you find a mask that fits well and give you time to get used to the air flowing through it. The sensors for the recording go on your head, face, chest, and legs, with a clip on your finger.

Keeping comfortable

During the night, the sleep scientist can adjust the mask or swap it for another if it leaks or feels uncomfortable. A call system links your room to the monitoring room, so you can ask for help at any time.

Please tell the sleep scientist if the pressure feels uncomfortable, your nose or throat feels dry, or the mask bothers you. The sensors and the mask come off in the morning, and then you can leave.

Why might your doctor recommend it?

A laboratory start is recommended for some people beginning CPAP. They include people with significant heart or lung conditions or with central sleep apnoea, and people who take strong pain medications (opioids), which can affect breathing during sleep. Conditions that can keep the oxygen level low for long periods at night, such as some nerve and muscle conditions, are another reason.

Staff in a laboratory can also show you how to put the mask on and take it off, which some people find difficult at first.

How is it different from starting CPAP at home?

In the laboratory or at home

People with uncomplicated sleep apnoea can start CPAP at home instead. For one or more nights, they use a machine that adjusts its own pressure as they sleep (auto-adjusting CPAP), and the record it keeps shows how much pressure they need.

One night in a laboratory lets a sleep scientist watch the recording and change the mask or pressure straight away. Several nights at home can show how much your needs vary from night to night, for example with sleeping position or alcohol. The sleep physician will explain which suits your sleep apnoea and your health.

Bilevel and split-night studies

Some people need two pressures, a higher one as they breathe in and a lower one as they breathe out. This is bilevel therapy, and its settings can be worked out during an overnight study in a laboratory or while you are awake during the day.

Sometimes the diagnosis and the CPAP study are done on the same night. In a split-night study, the first part of the night is recorded without treatment, and if it shows severe sleep apnoea, CPAP is started for the rest of the night.

Preparing for the study and getting your results

Before the night

Please follow the instructions the sleep laboratory gives you, including what to bring for the night. If you already use CPAP, the laboratory may ask you to bring your own mask and machine.

Please do not stop or change a medication without your doctor's advice.

Please contact the laboratory if you become unwell before the night, for example with a chest infection or a flare-up of a heart or lung condition. The study may need to wait until you have recovered.

After the study

If you feel sleepy in the morning, please do not drive, and ask someone to take you home.

How the results guide care

After the night, the recording is analysed, and a report goes to the doctor who referred you for the study. It sets out the pressures that were tried and recommends a pressure and a mask, and the doctor who referred you can go through the results with you.

The recommended pressure is used to set up CPAP at home. CPAP machines and masks come from CPAP equipment suppliers, and some suppliers hire out the machines. Pressure needs can change, for example after a lot of weight loss, so please talk to your sleep physician if your weight or symptoms change.

If you have been referred to Sleepscope

Your GP or specialist can refer you to a Sleepscope sleep physician to discuss your sleep study results and treatment. If a CPAP titration study would help, the sleep physician can refer you to a hospital sleep laboratory, which will give you its own instructions for the night.

Fees are listed on each clinic's page, and the clinic will confirm them before your visit.

The consultation takes up to 30 minutes and needs no preparation. Please arrive 10 to 15 minutes early to complete the forms. After your visit, the sleep physician will send a letter to your referring doctor.

What to bring

  • Your GP or specialist referral and any previous sleep study reports.
  • Your Medicare card.
  • A list of your medications and supplements, including doses.
  • Details of any CPAP or other treatment you have tried, and questions for the sleep physician.

Where you can be seen

Sleepscope physicians see patients at clinics in Victoria and Queensland. If you have a referral, our team can confirm the location and appointment details.

View clinic locations

Common questions

Does Sleepscope perform CPAP titration studies?

No. CPAP titration studies take place in a hospital sleep laboratory. Sleepscope sleep physicians may be able to see patients with a valid referral from their GP or specialist, and can refer you for the study.

Does everyone starting CPAP need a titration study?

No. People with uncomplicated sleep apnoea can start CPAP at home with a machine that adjusts its own pressure. A laboratory study is recommended for some people, such as those with significant heart or lung conditions or central sleep apnoea, and the sleep physician will explain what suits you.

Is a CPAP titration study the same as an in-lab sleep study?

It is one kind. An in-lab sleep study usually records your sleep without treatment, to find out whether you have a sleep disorder. A titration study records your sleep while you use CPAP, to find the pressure you need.

What if I cannot sleep with the mask on?

Please tell the sleep scientist, who can adjust the mask or try a different one. Getting used to CPAP can take time, and if you slept very little, the sleep physician will advise whether another study is needed.